M3-5AX Vertical Machining Center
Videos
Specifications
| Item | M3-5AX Fanuc Heidenhain |
||||
| Travel | |||||
| X-axis Stroke | mm (inch) | 750 (29.53) | |||
| Y-axis Stroke | mm (inch) | 900 (35.43) | |||
| Z-axis Stroke | mm (inch) | 550 (21.65) | |||
| A-axis tilt angle / C-axis rotation angle | deg | ±120 / 360 | |||
| Distance from Table Surface to Spindle Gauge Plane |
mm (inch) | 140 ~ 690 (5.51 ~27.17) | |||
| Distance from the top surface of X axis guide to the center of the spindle |
mm (inch) | 457 (17.99) | |||
| Table | |||||
| Table Size | mm (inch) | Ø700 (Ø27.56) x 540 (21.26) | |||
| Table Loading Capacity | kgf (lbf) | 800 (1,764) | |||
| Table Surface Configuration | mm (inch) | 18 x 100 (0.71 x 3.94) / 5ea | |||
| Spindle | |||||
| Max Spindle Speed | rpm | 20,000 (STD) | 24,000 | 14,000 (High Torque) | 20,000 |
| Spindle Motor | kW (HP) | 37 / 18.5 (50 / 25) | 37 / 22 (50 / 30) | 24 (32) | |
| Type of Spindle Taper Hole | – | BBT-40 (7/24 Taper) | |||
| Spindle Bearing Inner Diameter | mm (inch) | Ø70 (Ø2.76 | |||
| Method of Spindle Lubrication & Cooling | – | Oil-Jet Lubrication + Jacket Cooling | |||
| Feed Rate | |||||
| Rapid Speed (X / Y / Z) | m/min (ipm) | 48 / 48 / 40 (1,890 / 1,890 / 1,575) | |||
| Rapid Speed (A / C) | rpm | 30 / 40 | |||
| Feed (X / Y / Z) | m/min (ipm) | 24 / 24 / 24 (944 / 944 / 944) | |||
| Motor | |||||
| Feed Motor (X / Y / Z / A / C) | kW(HP) | 7 / 4 / 7 / 4 / 7 (9.4 / 5.4 / 9.4 / 5.4 / 9.4) | 8.9 / 8.6 / 8.9 / 5.4 / 8.6 (11.9 / 11.5 / 11.9 / 7.2 / 11.5) |
||
| Spindle Coolant Motor | kW(HP) | 0.75 (1) | |||
| Table Coolant Motor | kW(HP) | 0.4 (0.5) | |||
